INDe Drums - Cymbal Arm Bundle (with BR2 bracket)

Allow 2-4 weeks for delivery of products from Independent Drum Lab.

About this Bundle

With this bundle you get the INDe Drums Ultralight Cymbal Arm along with a BR2 (or BR2XL) mounting bracket to hold the cymbal arm. The bracket can either replace your old bracket in its existing holes, eliminating the need to drill any additional holes in your drum shell, or be installed from new.

Included with this Bundle

The following is included with the bundle:

• Ultralight Cymbal Arm
  1x Cymbal arm measuring 12, 14, 16 or 18 inches.
  1x Memory Lock
  1x Gearless multi-clamp
  1x Cymbal Rod with cymbal gummi)
• BR2 or BR2XL bracket
  1x BR2 or BR2XL Mounting Bracket

About the Cymbal Arm itself

INDe Drums Ultralight Cymbal Arms features a light 10.5mm aluminum L-arm with INDe's gearless multi-clamp tilter and a cymbal rod.

Available in four standard lengths - 16, 18, 20 and 22 inches (measured from the centerline of the L-Arm base to the cymbal location - see below), these arms offer great versatility in setup.

The measured length indicates the maximum reach, allowing for flexible positioning.

About the BR2 Bracket (and which model to choose)

The BR2 bracket is available in two different versions: BR2 and BR2XL. The difference is the space between the mounting screws, so it is rather important that you measure the distance, before you order.

The BR2 bracket has a hole spacing between 2,54 to 5,08 cm (1 - 2 inches).
The BR2XL bracket has a hole spaceing between 5,08 - 8,13 cm (2 - 3,2 inches).

About the Bracket Colors

Also, the BR2 bracket (not the XL version) is also available in brass or black.