INDe Drums - Bassdrum Spur Bundle - Lug Version

Allow 2-4 weeks for delivery of products from Independent Drum Lab.

About this bundle

• BR3 Brackets
  2x BR3 Brackets - Replaces your existing lugs
• Ultralight Bassdrum Spurs
  1x Set of 10.5mm Ultralight Spurs
  Choose from 4 sizes. Refer to the length recommendation chart below (under 'Sizing').
• Memory Locks
  2x Memory locks included
  

This particular kit mounts your bass drum spurs, where two of your exiting lugs are placed. This is done by retrofitting the exiting lug with the BR3 bracket, which is both a lug and a spur bracket.

This Bass Drum upgrade kit enables you to mount bass drum spurs without the necessity of drilling holes, utilizing the existing holes from your old lug. Employing INDe Drums' Patented suspension mounts and gullwing-style spurs, you achieve an elegant and straightforward solution.

Features

• Experience Better Stability: These components are much sturdier compared to the spurs found on many vintage drums.
• Enhanced Portability: The kit folds around the bass drum, allowing it to easily fit into cases.
• Enjoy Better Sound: Suspension brackets enable increased resonance for improved audio quality.
• Memory Locks ensure repeatable setups every time.
• Easy Installation: These components can be installed on virtually any drum without the need for drilling.
• Protected by US Patents 10,366,681 B2 and 9,792,888 B1.

Sizing

For the BR3/Lug-replacement installations, select the size and lug count of your drum from the provided list.

If using a riser, add the riser's height to the length of the spurs.

Note: Only standard 12-24 thread tension rods will work! DW/PDP and Pearl use non-standard tension rods. DW/PDP employ non-standard threading, and Pearl uses non-standard diameter.

Risers and floor toms

6” spurs are ideal for floor-tom to bass drum conversions using the existing brackets.